It was all in a day’s work for our team, but it was lovely to know it was appreciated and
to receive such a kind gesture from a satisfied customer.
Hydraulic specialists for sales and repairs. Products supplied are pumps, motors, valves, filters, seal kits etc. Distributor for Danfoss, Turolla, Parker Hannifin and Hy-Pro.
All in a day's work
A local fisherman brought in a hydraulic motor for
inspection and possible reseal.
Unfortunately the motor was beyond economical repair because the shaft
was badly worn. The fisherman ordered a
new motor and needed it urgently because he was due out on the open sea in two days
time and it operated the winch used to pull in the crab pots. We did not hold the hydraulic motor in stock,
however, our sales team managed to source one and arranged for a next day
morning delivery. Our customer returned
to collect the hydraulic motor and kindly gave us a tray of freshly cooked
crabs as a thank you.
Hydraulic Repairs - hydraulic motor (MHA1400C107BV1512226)
Roll on the good weather and a day out at the fairground ...
Today our engineer is delivering a repaired HTL hydraulic motor (Hydrostatic Transmissions Limited) to a fairground ride owner. The hydraulic motor (MHA1400C107BV1512226) was sent to our workshop and upon inspection was found to have a broken output shaft and worn cylinder block. A new shaft and cylinder block were fitted, together with a seal kit, oldham plate, bearing cup and cone sets. After re-assembly the HTL hydraulic motor was tested on our in-house test rig and then prepared for despatch to our customer.
P&R Hydraulics has been doing hydraulic repairs for many years. Since purchasing Hydraulics Direct (Essex) in 2009, we branched out into HTL hydraulic motor repairs and over the years we have gained a good reputation for these.
P&R Hydraulics are hydraulic specialists for sales, repairs and site visits. We hold an extensive stock of hydraulic components which can be supplied on a next day delivery. Our in-house workshop, test-rig and trained engineers enable us to inspect, test and repair hydraulic motors, pumps and valves, helping our customers keep their downtime to a minimum. For more information on HTL hydraulic motors or hydraulic repairs please contact us on tel: 01603 424880.
Today our engineer is delivering a repaired HTL hydraulic motor (Hydrostatic Transmissions Limited) to a fairground ride owner. The hydraulic motor (MHA1400C107BV1512226) was sent to our workshop and upon inspection was found to have a broken output shaft and worn cylinder block. A new shaft and cylinder block were fitted, together with a seal kit, oldham plate, bearing cup and cone sets. After re-assembly the HTL hydraulic motor was tested on our in-house test rig and then prepared for despatch to our customer.
P&R Hydraulics has been doing hydraulic repairs for many years. Since purchasing Hydraulics Direct (Essex) in 2009, we branched out into HTL hydraulic motor repairs and over the years we have gained a good reputation for these.
P&R Hydraulics are hydraulic specialists for sales, repairs and site visits. We hold an extensive stock of hydraulic components which can be supplied on a next day delivery. Our in-house workshop, test-rig and trained engineers enable us to inspect, test and repair hydraulic motors, pumps and valves, helping our customers keep their downtime to a minimum. For more information on HTL hydraulic motors or hydraulic repairs please contact us on tel: 01603 424880.
| Hydraulic motor (MHA1400C107BV1512226) - internal view |
Hydraulic Steering Pumps
Hydraulic steering pumps
P & R Hydraulics is a Dynamatic distributor and can supply their hydraulic steering pumps. Dynamatic Limited UK was previously known as Sauer Danfoss.
Part numbers of the hydraulic steering pumps shown in the image below are:-
Sauer Danfoss/Dynamatic 550.1.32029, A8.0/12.5L-32029 and JCB No 20/204900
Sauer Danfoss/Dynamatic 550.1.29926, A12.5L-29926 and JCB No 20/205200
Sauer Danfoss/Dynamatic 550.1.19900, A8.2L-19900 and JCB No 20/201800
Sauer Danfoss/Dynamatic 550.1.38141, C16L-38141 and JCB No 20/950285
| Hydraulic steering pumps |
These hydraulic steering pumps are suitable for the following JCB machines:-
Fastrac 175, 185, 3185
525 Telescopic Loader
1CX Backhoe/Loader
3CX Backhoe/Loader
4CX Backhoe/Loader
3CX-2 Backhoe/Loader
3CX-4 Backhoe/Loader
3D Backhoe/Loader
P & R Hydraulics are hydraulic specialists for both sales and repairs. Please contact us on 01603 424880 for more information.
157B4033 PVG32 PVEH Actuator 11/32V – Sauer Danfoss
![]() |
This particular PVE module has a Hirschmann connector and
passive fault monitoring. We also stock
and supply models with AMP connector and Deutsch connector, passive and active
fault monitoring.
PVE = proportional valve electrical actuator. The Sauer Danfoss PVE is built on more than
30 years experience of electrical valve control and is the perfect fit for
their high performance proportional valves PVG32, PVG100 and PVG120. The philosophy of electrohydraulic actuation,
type PVE, is integration of electronics, sensors and actuators into a single
unit that interfaces directly to the proportional valve body.
P&R Hydraulics supplies official Sauer Danfoss hydraulic
products, including pumps, motors, valves, steering units, seal kits etc. The PVEH Actuator (157B4033) can be
supplied separately or as part of an assembled PVG32 valve. P&R Hydraulics can custom build PVG32, PVG100 and PVG120 valves to customer’s specifications. We also perform repairs, tests and inspections of hydraulic units in our in-house workshop.
If you would like more information on Sauer Danfoss products
please do not hesitate to contact our Sales Team on 01603 424880 or
sales@pandrhydraulics.com| PVE electrical actuation | ||||
| Description | Connector | |||
| Hirschmann | AMP | Deutsch | ||
| PVEO, on/off | 12V | 157B4216 | 157B4901 | 157B4291 |
| 24V | 157B4228 | 157B4902 | 157B4292 | |
| PVEO-R, on/off | 12V | 157B4217 | 157B4903 | - |
| 24V | 157B4229 | 157B4904 | - | |
| PVEM, prop. medium - standard | 12V | 157B4116 | - | - |
| 24V | 157B4128 | - | - | |
| PVEM, prop. medium - float - > B | 12V | 157B4416 | - | - |
| 24V | 157B4428 | - | - | |
| PVEA, active fault monitoring | - | 157B4734 | 157B4792 | |
| PVEA, passive fault monitoring | - | 157B4735 | - | |
| PVEA-DI, active fault monitoring | - | 157B4736 | 157B4796 | |
| PVEA-DI, passive fault monitoring | - | 157B4737 | - | |
| PVEH, active fault monitoring | 157B4032 | 157B4034 | 157B4092 | |
| PVEH, passive fault monitoring | 157B4033 | 157B4035 | 157B4093 | |
| PVEH float - > B, active fault monitoring | 157B4332 | - | 157B4392 | |
| PVEH float - > A, active fault monitoring | - | 157B4338 | - | |
| PVEH-DI, active fault monitoring | - | 157B4036 | 157B4096 | |
| PVEH-DI, passive fault monitoring | - | 157B4037 | - | |
| PVES, active fault monitoring | 157B4832 | 157B4834 | 157B4892 | |
| PVES, passive fault monitoring | 157B4833 | 157B4835 | - | |
| PVES - Proportional, super | ||||
| PVEH - Proportional, high performance | ||||
| PVEA - Proportional, low hysteresis | ||||
| PVEM - Proportional, medium performance | ||||
| PVEO - on/off | ||||
Keep your machinery working when you need it the most
Spring
is just around the corner and lawns will need cutting. So if the hydraulics on your grass cutting equipment
need a little TLC give P&R a call.
P&R
Hydraulics specialises in turf maintenance hydraulics for grass cutting equipment.
We hold extensive stock of high quality supplies for sale, eg cutter pumps,
motors, valves, repair kits, filters and
hydrostats. These items are manufactured by the most
trusted names in the hydraulics industry today, including Sauer Danfoss,
Turolla OCG, Parker Hannifin, David Brown, Webtec, Walvoil and Cassappa.
Not
only can we supply new components, but in-house workshop and up to date test
facilities enable us to offer a comprehensive service on hydraulic pumps,
motors and valves.
For
larger grass cutting equipment or groundscare machinery we offer a local on-site service for customers
based in East Anglia because we understand the need to reduce machinery
downtime and keep costs to a minimum.
Please
contact us on 01603 424880 or mail@pandrhydraulics.com. Our sales and technical staff will be pleased
to help you.
Image - turf
maintenance hydraulic products shown are Sauer Danfoss HTP transmission pump,
Ultra/Parker cutter motors and cylinder cut off diverter valve. Please note the
Sauer Danfoss HTP pump is obsolete and we have limited stock available.
Sauer Danfoss distributor (UK)
P&R Hydraulics is an official Sauer Danfoss distributor (UK) for hydraulic products, and has been since its formation in 2000 when Sauer-Sundstrand and Danfoss Fluid Power merged.
Over the years P&R Hydraulics has gained a vast knowledge of Sauer Danfoss hydraulic products and we endeavour to hold a broad range of stock, available at competitive prices. These products include:-
· Hydraulic motors
· Hydrostatics and mechanical gearboxes
· Open circuit gear units and axial piston pumps
· Hydraulic valves
· Steering components and systems
· Seal kits and repair kits
· Electrohydraulic components and systems.
Not only can we supply new components but also we offer a repair service with our in-house workshop and test rig. Our experienced engineers can repair, modify and test Sauer Danfoss hydraulic units – motors, pumps and valves. Also we can custom build hydraulic directional control valves, both manual and proportional.
As one of the largest companies in the mobile hydraulics industry, Sauer Danfoss designs and manufactures a complete range of engineered hydraulic and electronic components for a broad range for mobile machinery. The business provides complete fluid power systems characterised by reliability, efficiency and ease of operation.
So if you are looking for genuine parts from a Sauer Danfoss distributor (UK) or you have any hydraulic query please contact us on tel: 01603 424880.
LAMMA 2013
We will be at the LAMMA show again in 2013. The dates are Wednesday 16th and Thursday 17th January 2013. P&R Hydraulics will be in Hall No 1a, Stand No 141. Please come along and see us, as we look forward to meeting customers new and old, and anyone who would like to talk about hydraulics.
LAMMA is described as the UK's leading farm machinery equipment and services show, and is held each year at the Newark and Notts Showground. It is predominantly for the agricultural and rural industries and has a wide range of products on display. The 2012 show attracted over 750 trade stands which showed products and services from companies from the UK and overseas. For more information visit their website - www.lammashow.co.uk
P&R Hydraulics specialises in the sale and repair of hydraulic pumps, motors and valves. We offer a full range of branded products backed by professional and reliable customer service - helping to keep your machinery operating and downtime to a minimum. We also have an on-site service for the East Anglia region (visits further afield will be considered upon more information).
LAMMA is described as the UK's leading farm machinery equipment and services show, and is held each year at the Newark and Notts Showground. It is predominantly for the agricultural and rural industries and has a wide range of products on display. The 2012 show attracted over 750 trade stands which showed products and services from companies from the UK and overseas. For more information visit their website - www.lammashow.co.uk
P&R Hydraulics specialises in the sale and repair of hydraulic pumps, motors and valves. We offer a full range of branded products backed by professional and reliable customer service - helping to keep your machinery operating and downtime to a minimum. We also have an on-site service for the East Anglia region (visits further afield will be considered upon more information).
Subscribe to:
Comments (Atom)

.jpg)



