Hydraulic Repairs - hydraulic motor (MHA1400C107BV1512226)

Roll on the good weather and a day out at the fairground ...

Today our engineer is delivering a repaired HTL hydraulic motor (Hydrostatic Transmissions Limited) to a fairground ride owner.  The hydraulic motor (MHA1400C107BV1512226) was sent to our workshop and upon inspection was found to have a broken output shaft and worn cylinder block.  A new shaft and cylinder block were fitted, together with a seal kit, oldham plate, bearing cup and cone sets.  After re-assembly the HTL hydraulic motor was tested on our in-house test rig and then prepared for despatch to our customer.

P&R Hydraulics has been doing hydraulic repairs for many years.  Since purchasing Hydraulics Direct (Essex) in 2009, we branched out into HTL hydraulic motor repairs and over the years we have gained a good reputation for these.

P&R Hydraulics are hydraulic specialists for sales, repairs and site visits.  We hold an extensive stock of hydraulic components which can be supplied on a next day delivery.  Our in-house workshop, test-rig and trained engineers enable us to inspect, test and repair hydraulic motors, pumps and valves, helping our customers keep their downtime to a minimum.  For more information on HTL hydraulic motors or hydraulic repairs please contact us on tel: 01603 424880.



Hydraulic motor (MHA1400C107BV1512226) - internal view
 

Hydraulic Steering Pumps

Hydraulic steering pumps

P & R Hydraulics is a Dynamatic distributor and can supply their hydraulic steering pumps.  Dynamatic Limited UK was previously known as Sauer Danfoss.

Part numbers of the hydraulic steering pumps shown in the image below are:-

Sauer Danfoss/Dynamatic 550.1.34333/135, C4.1/18.2L-34333/135 and JCB No 20/207000
Sauer Danfoss/Dynamatic 550.1.32029, A8.0/12.5L-32029 and JCB No 20/204900
Sauer Danfoss/Dynamatic 550.1.29926, A12.5L-29926 and JCB No 20/205200
Sauer Danfoss/Dynamatic 550.1.19900, A8.2L-19900 and JCB No 20/201800
Sauer Danfoss/Dynamatic 550.1.38141, C16L-38141 and JCB No 20/950285


Hydraulic steering pumps



These hydraulic steering pumps are suitable for the following JCB machines:-

Fastrac 175, 185, 3185

525 Telescopic Loader

1CX Backhoe/Loader

3CX Backhoe/Loader

4CX Backhoe/Loader

3CX-2 Backhoe/Loader

3CX-4 Backhoe/Loader

3D Backhoe/Loader

P & R Hydraulics are hydraulic specialists for both sales and repairs. Please contact us on 01603 424880 for more information.

157B4033 PVG32 PVEH Actuator 11/32V – Sauer Danfoss

P & R Hydraulics is an official distributor for Sauer Danfoss hydraulic products, of which the 157B4033 PVG32 PVEH Actuator 11/32V is one of our popular products.

This particular PVE module has a Hirschmann connector and passive fault monitoring.  We also stock and supply models with AMP connector and Deutsch connector, passive and active fault monitoring.

PVE = proportional valve electrical actuator.  The Sauer Danfoss PVE is built on more than 30 years experience of electrical valve control and is the perfect fit for their high performance proportional valves PVG32, PVG100 and PVG120.  The philosophy of electrohydraulic actuation, type PVE, is integration of electronics, sensors and actuators into a single unit that interfaces directly to the proportional valve body.

P&R Hydraulics supplies official Sauer Danfoss hydraulic products, including pumps, motors, valves, steering units, seal kits etc.  The PVEH Actuator (157B4033) can be supplied separately or as part of an assembled PVG32 valve.  P&R Hydraulics can custom build PVG32, PVG100 and PVG120 valves to customer’s specifications. We also perform repairs, tests and inspections of  hydraulic units in our in-house workshop.

If you would like more information on Sauer Danfoss products please do not hesitate to contact our Sales Team on 01603 424880 or sales@pandrhydraulics.com

PVE electrical actuation
Description		Connector
		Hirschmann	AMP	Deutsch
PVEO, on/off	12V	157B4216	157B4901	157B4291
	24V	157B4228	157B4902	157B4292
PVEO-R, on/off	12V	157B4217	157B4903	-
	24V	157B4229	157B4904	-
PVEM, prop. medium - standard	12V	157B4116	-	-
	24V	157B4128	-	-
PVEM, prop. medium - float - > B	12V	157B4416	-	-
	24V	157B4428	-	-
PVEA, active fault monitoring		-	157B4734	157B4792
PVEA, passive fault monitoring		-	157B4735	-
PVEA-DI, active fault monitoring		-	157B4736	157B4796
PVEA-DI, passive fault monitoring		-	157B4737	-
PVEH, active fault monitoring		157B4032	157B4034	157B4092
PVEH, passive fault monitoring		157B4033	157B4035	157B4093
PVEH float - > B, active fault monitoring		157B4332	-	157B4392
PVEH float - > A, active fault monitoring		-	157B4338	-
PVEH-DI, active fault monitoring		-	157B4036	157B4096
PVEH-DI, passive fault monitoring		-	157B4037	-
PVES, active fault monitoring		157B4832	157B4834	157B4892
PVES, passive fault monitoring		157B4833	157B4835	-
PVES   -   Proportional, super
PVEH   -   Proportional, high performance
PVEA   -   Proportional, low hysteresis
PVEM   -   Proportional, medium performance
PVEO   -   on/off

Keep your machinery working when you need it the most

Spring is just around the corner and lawns will need cutting.  So if the hydraulics on your grass cutting equipment need a little TLC give P&R a call.

P&R Hydraulics specialises in turf maintenance hydraulics for grass cutting equipment. We hold extensive stock of high quality supplies for sale, eg cutter pumps, motors, valves, repair kits, filters and hydrostats.  These items are manufactured by the most trusted names in the hydraulics industry today, including Sauer Danfoss, Turolla OCG, Parker Hannifin, David Brown, Webtec, Walvoil and Cassappa.

Not only can we supply new components, but in-house workshop and up to date test facilities enable us to offer a comprehensive service on hydraulic pumps, motors and valves.

For larger grass cutting equipment or groundscare machinery  we offer a local on-site service for customers based in East Anglia because we understand the need to reduce machinery downtime and keep costs to a minimum.

Please contact us on 01603 424880 or mail@pandrhydraulics.com.  Our sales and technical staff will be pleased to help you.

 

Image - turf maintenance hydraulic products shown are Sauer Danfoss HTP transmission pump, Ultra/Parker cutter motors and cylinder cut off diverter valve. Please note the Sauer Danfoss HTP pump is obsolete and we have limited stock available.

Sauer Danfoss distributor (UK)

P&R Hydraulics is an official Sauer Danfoss distributor (UK) for hydraulic products, and has been since its formation in 2000 when Sauer-Sundstrand and Danfoss Fluid Power merged.

Over the years P&R Hydraulics has gained a vast knowledge of Sauer Danfoss hydraulic products and we endeavour to hold a broad range of stock, available at competitive prices.  These products include:-

·         Hydraulic motors

·         Hydrostatics and mechanical gearboxes

·         Open circuit gear units and axial piston pumps

·         Hydraulic valves

·         Steering components and systems

·         Seal kits and repair kits

·         Electrohydraulic components and systems.

Not only can we supply new components but also we offer a repair service with our in-house workshop and test rig.  Our experienced engineers can repair, modify and test Sauer Danfoss hydraulic units – motors, pumps and valves.  Also we can custom build hydraulic directional control valves, both manual and proportional.   

As one of the largest companies in the mobile hydraulics industry, Sauer Danfoss designs and manufactures a complete range of engineered hydraulic and electronic components for a broad range for mobile machinery.  The business provides complete fluid power systems characterised by reliability, efficiency and ease of operation. 

So if you are looking for genuine parts from a Sauer Danfoss distributor (UK) or you have any hydraulic query  please contact us on tel: 01603 424880.

LAMMA 2013

We will be at the LAMMA show again in 2013.  The dates are Wednesday 16th and Thursday 17th January 2013.  P&R Hydraulics will be in Hall No 1a, Stand No 141.  Please come along and see us, as we look forward to meeting customers new and old, and anyone who would like to talk about hydraulics.

LAMMA is described as the UK's leading farm machinery equipment and services show, and is held each year at the Newark and Notts Showground. It is predominantly for the agricultural and rural industries and has a wide range of products on display. The 2012 show attracted over 750 trade stands which showed products and services from companies from the UK and overseas.  For more information visit their website - www.lammashow.co.uk

P&R Hydraulics specialises in the sale and repair of hydraulic pumps, motors and valves.  We offer a full range of branded products backed by professional and reliable customer service - helping to keep your machinery operating and downtime to a minimum.  We also have an on-site service for the East Anglia region (visits further afield will be considered upon more information).

Engraving Machine

Engraving machine

P&R Hydraulics has invested in a Benchmark 320 engraving machine, which produces high quality permanent marking on a wide range of materials from soft plastics to hard metals.


We are using the engraver to put identification details on 8cm name plates to be fitted onto hydraulic pumps and motors.  Not only do the plates give the part and serial numbers but also remind our customers of where they purchased the item.


P&R are hydraulic specialists for sales and repairs.  We hold an extensive stock of high quality hydraulic supplies for sale.  These items are manufactured by the most trusted names in the hydraulics industry today, including Sauer Danfoss, Turolla OCG and Parker Hannifin.  Also we can inspect, repair and test a wide variety of hydraulic pumps, motors and valves.  Our on-site workshop and maintenance facility includes a test rig which allows our experienced team to rapidly diagnose product faults and failures.

Please contact us for further details - tel 01603 424880.